Article
权问薇
2017-05-30
准备材料
1、容器选择
首先是一个排水良好的瓦盆,排水孔够多,准备垫底的砾石、小鹅卵石,盆栽土也要选择疏松的。
2、土壤介质
如果只是为了让植物发根,前期可以先准备珍珠岩或河沙,植物插穗插进去保持温润,加上套袋,成功率比土培生根要快一点。
3、生根粉
是否决定要使用生根剂,这还是要看你扦插的是什么植物,如果是月季、番茄、香草植物之类容易生根的,那就没太大必要。毕竟是化学物质,不能用太多,按照说明书适量即可。(也可以用柳树枝叶泡热水代替)
扦插过程
1、土壤准备
土壤可以混合一些河沙或珍珠岩,增加排水性和透气性,接着就是将土壤喷湿,湿润但不要浇透,如果太潮湿也不太适合。
2、植物插穗处理
用来剪插穗的剪刀肯定要经过消毒,并且要锋利,沿着植物茎斜剪,这里用的是仙人指作为示范。
斜着剪可以增加插穗和土壤的接触面积,它的生根面积也会更大,更容易生根。
如果是其他插穗要去掉下部的叶子,顶部留4片叶子即可,还要去掉多余的花蕾,扦插不留花。
植物插穗
可以沾一下生根粉(底部沾一点即可),如果你决定要用,沾一点即可,也可以兑水,放在溶液中浸泡几分钟。
3、扦插处理
用手指挖一个小坑,把植物的茎埋进土里,埋进的部分约1/4即可,土稍微压一下。
如果温度低于17度,扦插繁殖就没有那么容易,那么我们可以用给它覆上保鲜膜,仙人指的插穗不高,所以可以直接用保鲜膜盖住。
覆上保鲜膜
如果是其他高一点插穗,那么就要用那种立起来塑料袋,避免塑料袋和插穗接触,可以做一些支撑。
4、摆放位置
把扦插好的盆栽放在一个温暖、通风、有散射光的地方,每天中午给它掀开膜3个小时。(也可以在保鲜膜上面戳多几个孔)
要经常喷水,保持盆土微润而不潮湿,不能积水,每天给植物喷点雾状水,1~2个星期,你就能看到它们开始长根了。
喷水
总体而言,算是利用保鲜膜,制作了一个类似小温室的装置~
冬季突然想要扦插的花友们~可以尝试一下哦~
0
0
Article
权问薇
2017-05-30
长寿花枝插方法
1.枝插的时间
长寿花的枝插,最好要在夏、秋两季进行,在长寿花的枝芽繁茂的时候进行。
2.枝插的材料
选择健壮的无害的母株进行枝条的截剪做为扦插的枝条;
在母株上面截剪插条的时候要在腋芽上面1厘米左右的地方进行截剪;
截剪好以后,不要立刻扦插,还要对插条进行处理:
要先泡在清水里面大概一个小时,然后要把插条拿出来,放在通风处晾晒,等干了以后再进行扦插。
3.扦插基质的选择
在选择扦插基质的时候需要泥潭,营养土,沙子等基质都可以,注意要保持基质的湿润度。
4.进行扦插
准备好了,就可以直接把插条插到基质里面了,然后土壤埋到枝条的1/3处就可以。
长寿花枝插的养护
首先当枝插进行完以后,要注意按时按量往枝条上面喷洒营养液,这样有助于插条的生长,营养液可以是 0- 2%的磷酸二氢钾与蔗糖混合液。
喷洒的时间段基本上是在3~4周以后,每隔一个月就喷洒一次。
其次是浇水:对于长寿花的枝插,因为其植株本身就含有较高的水分,所以浇水不要频繁,以免引起枝条的腐烂,停止生长,浇水只需要3天浇水一次即可。
最后注意防寒保温:因为枝插的枝条叶子少,所以一定要注意保温工作,要放在光照好的地方,温度适合的地方养护。
2
1
Article
权问薇
2017-05-30
#茉莉花 第一次开花
一年当中,6月份的上旬的早花到7月份的上旬的这一次开花就是茉莉花的第一次的盛花期。此时茉莉花需要薄施勤肥,这样开花会比较旺盛。一般是每2天施肥一次,以腐熟的有机肥为好,要求肥水稀薄。
在此期间,浇水也是要充足的,可以每天都浇水,一般是在早晨的时候来浇水,施肥的话最好是在傍晚的时候进行。
茉莉花第二次开花
在进入8月份的时候,茉莉花的第二次花就要开放了,此时也是需要做好水肥管理。施肥的话需要施一些稍微浓一些的肥水,但是不要过浓,可以向茉莉花的叶面上喷洒一些过磷酸钙,开花会更好。到了8月份的下旬之后,就要逐步的开始减少施肥了,不过浇水需要每两天就浇一次。
茉莉花的第三次开花
茉莉花在一年当中,还会开出第三次花来,这次花是开在9月份的上旬——10月份的上旬的。此时已经进入了秋季,气温下降,会影响茉莉花的花蕾的形成,所以这一次开花,花量是比较小的
在这第三次开花的时候,应该停止施肥并且减少浇水。当花期结束之后,需要保持土壤湿润。
0
2
Article
权问薇
2017-05-30
#三角梅 的扦插时间
要想使三角梅可以成功的扦插,首先需要选择合适的扦插时间。
一般说来,一年当中的春季的的2月份——4月份和秋季的9月份——10月份是比较好的扦插时间,温度、光照和湿度都比较适合,并且不容易发生病虫害和死亡的现象。
不过,最好的扦插时间还是在春季,因为秋季进行扦插的话,需要经过冬季,可能会被冻伤。
三角梅的扦插枝条选择
三角梅的枝条,一般是分为嫩枝,以及硬枝,嫩枝一般是当年生的还不成熟的枝条,比较小并且养分的含量少,成活比较不容易。硬枝多是已经成熟的粗壮的硬质枝条,一般是一年生或者是一年生以上的成熟枝。
在进行扦插的时候,要剪下合适的长度,并且插穗上最好可以带有3个以上的芽。
还有,在秋季的时候,可以选择硬枝扦插,夏季可以嫩枝扦插。
三角梅的扦插枝条处理
对扦插要用到的枝条进行处理,这样就可以提高扦插的成活率。在进行扦插之前,越10天左右,可以在枝条的基部,进行环状切割,在进行扦插的前一天,在叶面喷洒些磷酸二氢钾。扦插的插穗可以浸泡一些生根粉,这样可以加速其生根。
0
3